Business Hours: Mon-Thurs: 8am-8pm, Fri: 8am-4pm, Sun: 10am-4pm

For Inquiries: Call us at 214-812-9001

Common Attic Insulation Mistakes and How to Avoid Them

Attic Insulation

Any house that has an attic needs special attention to how insulation has been implemented. The attic is the most likely place in a house where issues can occur with insulation. With improper insulation, there are more chances of leakages and high energy consumption.

When you’re carrying out an insulation job by yourself, there is a definite chance that you might overlook something. Hiring an experienced contractor like Insulation First in Dallas, TX, is the best way to go. With certified and insured experts, we can offer you premium insulation installation services right at your doorstep.

We will take you through a few issues when it comes to attic insulation and how you can avoid them.

Ignoring Air Leaks

One of the most common problems with attic insulation is the presence of air leaks. If you’re getting insulation done by an inexperienced agency or yourself, this is something that you should check. In general, attics have a lot of crevices, gaps, and even cracks that are quite easy to overlook when you lack the experience. Not filling these can cause several other issues, including moisture buildup and waterlogging.

What To Do

Check every inch of your attic for any holes or openings that might be the culprit. When you do find gaps, use spray foam or other types of insulative materials to form a tight seal around it. If you have windows, consider using a caulking gun or weather stripping to seal them to prevent air from entering inside. It’s also a good idea to seal the access point in the same way.

Using Improper Insulation

When it comes to insulation materials, you will find there is a lot of choice today. It can be overwhelming to choose from them, especially if you’re new and have no idea about what insulation entails. Here are some of the material choices you have – spray foam, fiberglass, mineral wood, cellulose, foam board, and more. Well, it really is an expansive list!

What To Do

The first thing you need to do is to research the different materials and find out how applicable each one is to your current needs. For example, if your attic has a lot of hard-to-get crevices, spray foam might be the best choice. Also, learning about R-values is important if you want to estimate the right amount of insulation accurately. Finally, also read up on proper insulation placement and installation to avoid air leaks.

Inadequate Ventilation

When you’re insulating your attic, it is always tough to get the ventilation right. If there’s too much ventilation, you’re going to risk moisture and cold getting into your home. You need to plan it just right if you want your attic to be free of moisture and keep proper insulation. The issues range from insulation blocking vents to vents being the wrong size.

What To Do

The first thing to understand is the purpose of ventilation in your attic. It helps balance the moisture levels inside your home with the outside. If your attic doesn’t have vents and baffles, ensure that you get them installed. In areas where the moisture is high, and the attic is large, you might need to improve ventilation with a fan. Lastly, ensure that none of the insulating material covers the vents.

Not Accounting for Access Points

An issue that many people overlook is access points in the attic. Areas around access points that haven’t been insulated are prone to leaking air and moisture. It considerably reduces the heating efficiency of your HVAC and increases energy bills. Doors, hatches, or stairs can all have this problem.

What To Do

The simple, straightforward solution is to ensure that the areas around your access points and even the access themselves have adequate insulation around them. Caulking, foam boards, or even insulation blankets are great ways to improve insulation around doors and hatches. If your attic has stairs, you could also invest in stair covers that can help insulate it better. A more effective but expensive option for stairs is an attic tent.

Lack of Safety Equipment

The last but most common issue with DIY insulation procedures is safety. Not many people are aware of the perils of insulation materials, and the risks vary according to the materials that people choose. A good example is fiberglass insulation. While it is one of the most common and highest-used insulation materials, laying it without adequate protective gear can result in severe health hazards.

What To Do

As a homeowner, if you want to get insulation done by yourself, then you should read up on different materials and their risks before you get started. Ensure you have the right protective gear with you before the process. When dealing with hazardous insulation, it’s always a great idea to have a buddy system in case of an emergency. Using a respirator is a great idea when dealing with insulation of your attic by yourself.

While the spirit of getting things done by yourself is commendable, you could mitigate risks and get better results with professional care. Insulation First is based out of Dallas, TX, and can help you with all your insulation needs. For a warm and cozy home, call us now to get started!

Don’t forget to share this post!

Search Insulation Blog:

Search